To make it work you need to copy a firmware from another similar chip, here are the needed commands:
sudo mkdir /lib/firmware/RTL8192U
sudo cp /lib/firmware/RTL8192E/* /lib/firmware/RTL8192U
sudo modprobe -rfv r8192u_usb
sudo modprobe -v r8192u_usb

librmagick-ruby_2.11.1-1ubuntu0.1.1_i386

See LP bug #539106

If you want a newer version you can use the 2.13.0 packaged here:
http://www.marcocimmino.net/2010/05/04/librmagick-ruby_2-13-0-2-for-ubuntu-lucid-10-04/

USE IT AT YOUR OWN RISK!

krusader_2.2.0~beta1-1_i386.deb

krusader-dbg_2.2.0~beta1-1_i386.deb

Certificate verification error: signed using insecure algorithm

The only workaround I found is to downgrade to libneon27-gnutls 0.28.6 that I have taken from Kubuntu Karmic and compiled for you. ENJOY!!!

WARNING: Use this at your own RISK, I’m not responsible for any damages!

libneon27-gnutls_0.29.0-1really0.28.6-1_i386.zip
for Ubuntu 10.04 32 bit

This installation of RMagick was configured with ImageMagick 6.5.5 but ImageMagick 6.5.7-8 is in use.

So I immediately searched through Launchpad and found that there is already a bug report about that: Bug #518122
That refers to an already fixed bug on Debian bug tracker: Bug #557778

So I just grabbed the Debian testing sources for librmagick-ruby_2.13.0-2 lowered one dependencies and finally compiled under my Lucid aaaaaand here we go, the zip package containing all debs you need to fix this issue! ENJOY!!!

WARNING: Use this at your own RISK, I’m not responsible for any damages!

librmagick-ruby_2.13.0-2_i386.zip for Ubuntu 10.04 32 bit

There are two type of issues:
1. usability issues
2. upgrade issues

I experienced both types!

1. Let’s start from the documentation and after getting rid of the initial windows I got this… but possible you can’t see it? The window is too small to read the whole text, WATTA F**K!

2. Then I continued and finally I got the update to start, I wanted to follow the update, but… scrollbar does not follow the bottom, WATTA F**K!

3. Ok I kept scrolling to see what is happening… after a while I got a cups update error that started eating also 1 out of 2 of my cpu… WATTA F**K!

4. All right I kept going on with one cpu out, update luckily continued despite the error.
Eventually it finished and I got the window that asked me to remove software, again I can’t read, the window is too small!!! WATTA F**K!

5. Let’s enlarge it! If you see it still says “Fetching installing the upgrade can take several hours” but upgrade is already finished, installer should only remove few packages, WATTA F**K!

6. Ok I removed those packages and proceed to the reboot.
After reboot nvidia drivers are no more installed and nv drivers are instead used, WATTA F**K!

7. So I tried to fix the issue installing via jockey latest nvidia drivers that supports my nVidia Quadro NVS 140M and after installation completed perfectly, X does not start anymore, it fails with the error:

Failed to load the NVIDIA kernel module!

WATTA F**K!

After many hours of research I found the issue and is easy to fix:

uninstall all linux-restricted-modules-common packages
delete the file /etc/modprobe.d/lrm-video

Seems this stupid file was left-over from Hardy installation even if I uninstalled all linux-restricted-modules-common packages and was provoking the nvidia load failure.
I filed a bug: https://bugs.launchpad.net/ubuntu/+source/update-manager/+bug/459829

Sorry but after FOUR usability issues and THREE upgrade issues, I can’t say that the upgrade is user friendly!

I will speak in the next days about the new Kubuntu 9.10, still a lot of usability issues here and there! Stay tuned!

• Kdenlive 0.7
• Kdenlive 0.7.1
• Kdenlive 0.7.2
• Kdenlive 0.7.3
• Kdenlive 0.7.4
• Kdenlive 0.7.5

here we are on with pre-compiled Kdenlive 0.7.6 package.

For who wants to know what is changed here is release notes.
Instructions:

• Install (only for Ubuntu 8.04) KDE 4.1 libraries in your Ubuntu: http://www.kubuntu.org/news/kde-4.1.2
• Unpack zip file to your favourite directory
• Open in an text editor the file: <dir>/bin/kdenlive_start
• Modify the line:
  export INSTALL_DIR=/home/marco/kdenlive
  according to the location where you unpacked the package
• Run the file: <dir>/bin/kdenlive_start
• Enjoy!

CLICK HERE TO DOWNLOAD KDENLIVE 0.7.6 PRECOMPILED ZIP PACKAGE – 29.80 MB

Information about revisions of modules at the time of compilation:
ffmpeg: Revision: 20198 Last Changed Date: 2009-10-10 12:40:36 +0200 (Sat, 10 Oct 2009)
mlt: commit 252ff26bb5a9ee25900b2c503f82a8356f8e9f8b Date: Wed Oct 7 00:53:22 2009 -0700
kdenlive: Revision: 4031 Last Changed Date: 2009-10-10 09:54:25 +0200 (Sat, 10 Oct 2009)
uname -a at time of compilation:
Linux t61-marco 2.6.24-24-generic #1 SMP Fri Sep 18 16:49:39 UTC 2009 i686 GNU/Linux
Information about cc at the time of compilation:
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v –enable-languages=c,c++,fortran,objc,obj-c++,treelang –prefix=/usr –enable-shared –with-system-zlib –libexecdir=/usr/lib –without-included-gettext –enable-threads=posix –enable-nls –with-gxx-include-dir=/usr/include/c++/4.2 –program-suffix=-4.2 –enable-clocale=gnu –enable-libstdcxx-debug –enable-objc-gc –enable-mpfr –enable-targets=all –enable-checking=release –build=i486-linux-gnu –host=i486-linux-gnu –target=i486-linux-gnu
Thread model: posix
gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu4)
/usr/bin/dpkg
Found dpkg – running dpkg -l to grep libc6
ii libc6 2.7-10ubuntu5 GNU C Library: Shared libraries
ii libc6-dbg 2.7-10ubuntu5 GNU C Library: Libraries with debugging symb
ii libc6-dev 2.7-10ubuntu5 GNU C Library: Development Libraries and Hea
ii libc6-i686 2.7-10ubuntu5 GNU C Library: Shared libraries [i686 optimi
Information about kde 4 at the time of compilation:
Qt: 4.4.1
KDE: 4.1.2 (KDE 4.1.2)
kde4-config: 1.0

After:

• Kdenlive 0.7
• Kdenlive 0.7.1
• Kdenlive 0.7.2
• Kdenlive 0.7.3
• Kdenlive 0.7.4

here we are on with pre-compiled Kdenlive 0.7.5 package.

For who wants to know what is changed here is release notes.
Instructions:

• Install (only for Ubuntu 8.04) KDE 4.1 libraries in your Ubuntu: http://www.kubuntu.org/news/kde-4.1.2
• Unpack zip file to your favourite directory
• Open in an text editor the file: <dir>/bin/kdenlive_start
• Modify the line:
  export INSTALL_DIR=/home/marco/kdenlive
  according to the location where you unpacked the package
• Run the file: <dir>/bin/kdenlive_start
• Enjoy!

CLICK HERE TO DOWNLOAD KDENLIVE 0.7.5 PRECOMPILED ZIP PACKAGE – 28.34 MB

Information about revisions of modules at the time of compilation:
ffmpeg: Revision: 19461 Last Changed Date: 2009-07-18 12:38:53 +0200 (Sat, 18 Jul 2009)
mlt: commit bf234cd08ba376f2157d3bd2dd0fc8f0c5e605e2 Date: Tue Jul 14 11:39:33 2009 -0700
kdenlive: Revision: 3730 Last Changed Date: 2009-07-14 12:07:52 +0200 (Tue, 14 Jul 2009)
uname -a at time of compilation:
Linux t61-marco 2.6.24-24-generic #1 SMP Tue Jul 7 19:46:39 UTC 2009 i686 GNU/Linux
Information about cc at the time of compilation:
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v –enable-languages=c,c++,fortran,objc,obj-c++,treelang –prefix=/usr –enable-shared –with-system-zlib –libexecdir=/usr/lib –without-included-gettext –enable-threads=posix –enable-nls –with-gxx-include-dir=/usr/include/c++/4.2 –program-suffix=-4.2 –enable-clocale=gnu –enable-libstdcxx-debug –enable-objc-gc –enable-mpfr –enable-targets=all –enable-checking=release –build=i486-linux-gnu –host=i486-linux-gnu –target=i486-linux-gnu
Thread model: posix
gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu4)
/usr/bin/dpkg
Found dpkg – running dpkg -l to grep libc6
ii libc6 2.7-10ubuntu4 GNU C Library: Shared libraries
ii libc6-dev 2.7-10ubuntu4 GNU C Library: Development Libraries and Hea
ii libc6-i686 2.7-10ubuntu4 GNU C Library: Shared libraries [i686 optimi
Information about kde 4 at the time of compilation:
Qt: 4.4.1
KDE: 4.1.2 (KDE 4.1.2)
kde4-config: 1.0

Amarok 2.1.1

Io non ci volevo credere… ma cosa stracazzo vuol dire?? Dunque ho pensato che fosse un errore di traduzione, del signor Vincenzo Reale cosi’ sono andato a pescare l’originale:
http://websvn.kde.org/trunk/l10n-kde4/it/messages/extragear-multimedia/amarok.po?revision=984273&view=markup

#: context/containments/verticallayout/VerticalToolbarContainment.cpp:55
“Please add some applets from the toolbar at the bottom of the context view.”
“Aggiungi qualche applet dalla barra degli strumenti in fondo alla vista di contesto.”

La traduzione e’ abbastanza fedele, e’ la versione originale in inglese che e’ gia’ abbastanza arzigogolata di suo. Ma io dico… ma ste stringhe ve le sognate di notte dopo una peperonata avariata??
Avanti su, cambiate interfaccia e ridateci il vecchio Amarok, piu’ completo ed usabile!

After:

• Kdenlive 0.7
• Kdenlive 0.7.1
• Kdenlive 0.7.2
• Kdenlive 0.7.3

and after reported compilation issues against KDE 4.1.x here we are on with pre-compiled Kdenlive 0.7.4 package.

For who wants to know what is changed here is release notes.
Instructions:

• Install (only for Ubuntu 8.04) KDE 4.1 libraries in your Ubuntu: http://www.kubuntu.org/news/kde-4.1.2
• Unpack zip file to your favourite directory
• Open in an text editor the file: <dir>/bin/kdenlive_start
• Modify the line:
  export INSTALL_DIR=/home/marco/kdenlive
  according to the location where you unpacked the package
• Run the file: <dir>/bin/kdenlive_start
• Enjoy!

CLICK HERE TO DOWNLOAD KDENLIVE 0.7.4 PRECOMPILED ZIP PACKAGE – 27.65 MB

Information about revisions of modules at the time of compilation:
ffmpeg: Revision: 19076 Last Changed Date: 2009-06-02 18:31:51 +0300 (Tue, 02 Jun 2009)
mlt: commit 6eb6dbb439b4440804c63c1845cb14e20a4b61fa Date: Sat May 30 09:01:12 2009 -0700
kdenlive: Revision: 3485 Last Changed Date: 2009-06-03 00:31:21 +0300 (Wed, 03 Jun 2009)
uname -a at time of compilation:
Linux t61-marco 2.6.24-24-generic #1 SMP Wed Apr 15 15:54:25 UTC 2009 i686 GNU/Linux
Information about cc at the time of compilation:
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v –enable-languages=c,c++,fortran,objc,obj-c++,treelang –prefix=/usr –enable-shared –with-system-zlib –libexecdir=/usr/lib –without-included-gettext –enable-threads=posix –enable-nls –with-gxx-include-dir=/usr/include/c++/4.2 –program-suffix=-4.2 –enable-clocale=gnu –enable-libstdcxx-debug –enable-objc-gc –enable-mpfr –enable-targets=all –enable-checking=release –build=i486-linux-gnu –host=i486-linux-gnu –target=i486-linux-gnu
Thread model: posix
gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)
/usr/bin/dpkg
Found dpkg – running dpkg -l to grep libc6
ii  libc6                                      2.7-10ubuntu4                                              GNU C Library: Shared libraries
ii  libc6-dev                                  2.7-10ubuntu4                                              GNU C Library: Development Libraries and Hea
ii  libc6-i686                                 2.7-10ubuntu4                                              GNU C Library: Shared libraries [i686 optimi
Information about kde 4 at the time of compilation:
Qt: 4.4.1
KDE: 4.1.2 (KDE 4.1.2)
kde4-config: 1.0